[ASK] Process Initialization Failed

kk tolongin dunk, pas saya mw recovery windows pake Flash disk, timbul layar biru dan muncul tulisan

A problem has been detected and Windows has been shut down to prevent damage to your computer.

PROCESS1_INITIALIZATION_FAILED

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical information:

*** STOP: 0x0000006B (0x0000003A, 0x00000002, 0x00000000, 0x00000000)

maksudnya apa y?? saya bener2 buntu ne >.<

kalo gue bilang sih itu virus gan.

jangan di simpen deh tu flash disk :)))

untuk lebih spesifikasi virusnya apa gue kurang ngerti gan :(((

di format aja FDnya gan..

@TS
Coba googling pesan kesalahannya aja

Dah ketemu :

Quote:

---

I know this thread is old, but I thought I'd let everyone here know that I fixed my ongoing issues with BSODs and random crashing. I found out that it was bad RAM causing the problems. I tested my memory using memtest and found out that one of my 512mb cards was causing 3000 or so errors in the tests. I found out which memory stick was causing the errors by taking each of my two 512mb memory sticks out of my towercase and testing them individually. I found out it was the memory stick in the first slot that was causing the errors, so I left it out. I haven't had any crashes since. The power outages probably caused the ram to go bad. Anyway, I took the bad ram to my computer parts supplier, and since the ram is still under warranty, I'm getting a new 512mb memory stick from RAmos in a few days. I'm so happy it's all fixed now, I've had the crashing problems for so long.

skulleh
http://forums.techguy.org/windows-xp...led-error.html

---

Jadi masalahnya ada di memori kamu, dia bilang :D
Klo bukan, apa kamu ada RoxioGoback atau Norton Goback di kompi kamu???

Tidak menutup kemungkinan virus sih :D

Quote:

---

Originally Posted by analog_man

kk tolongin dunk, pas saya mw recovery windows pake Flash disk, timbul layar biru dan muncul tulisan

A problem has been detected and Windows has been shut down to prevent damage to your computer.

PROCESS1_INITIALIZATION_FAILED

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical information:

*** STOP: 0x0000006B (0x0000003A, 0x00000002, 0x00000000, 0x00000000)

maksudnya apa y?? saya bener2 buntu ne >.<

---

Yup Masalahnya Di RAM.
RAM Loe Ada Yang Corrupt, Sehingga Waktu Mau Loading Suatu Program (Data Ditampung Dolo Di RAM),Tapi Data Program Tersebut Tidak Bisa Disimpan Sehingga Muncul Blue Screen Seperti Itu.
Saran Gw, Coba Bawa Dolo Tukar RAM Loe Ke Tempat Toko Loe ( RAM Kebanyakan Life Time Warranty ).Tapi Kalo Memang Nga Bisa Di Tukar Ganti Baru Terpaksa....Compie Loe Masih Bisa Dipake Tapi Nga Bisa Ngejalanin Program Yang Butuh RAM Besar.