ADA PERTNYAAN MENDASAR "APA ITU RROD ?"
JAWAB : RROD ADALAH KEADAAN KERUSAKAN/PUTUSNYA JARINGAN SOLDER PADA MAINBOARD XBOX 360 YANG DI AKIBATKAN CONSOLE TERSEBUT OVERHEAT / PANAS YANG LUAR BIASA DI KARENAKAN FABRIKASI PRODUCT YANG TIDAK SEMPURNA, PENJELASAN LAINNYA RROD ITU MUNCUL KETIKA CONSOLE XBOX 360 OVERHEATING TRUTAMA PADA GPU NYA
RROD pun penyakitnya ga cuma 1 yah gan .
Banyak code error yang menunjukkan kerusakan yang berbeda - beda .
SEBELUMNYA KALIAN JG PASTI INGIN TAU APA SAJA SICH CODE ERROR RROD XBOX 360 & BAGAIMANA CARA MELIHAT CODE ERROR NYA ?
PERTAMA NYALAKAN XBOX 360 RRODNYA TRUS TEKAN TOMBOL SYNC TOMBOL PUTIH BULET KECIL DI SBELAH KANAN SLOT MEMORI ATAU TOMBOL YANG BIASA DI GUNAKAN UNTUK SINGKRONISASI WIRELESS STICK XBOX360 DENGAN CONSOLENYA
TEKAN DAN TAHAN TOMBOL SYNC TERSEBUT DAN TEKAN TOMBOL EJECT DVD ROOM SEBANYAK EMPAT(4) KALI, SLAMA 4 KALI TOMBOL EJECT DI TEKAN PASTI LAMPU MERAH DI TOMBOL POWER YANG MUNCUL BERBEDA-BEDA
ITU MENANDAKAN EMPAT ANGKA BERURUTAN KODE ERROR PADA CONSOLE X360 :
1. BILA NYALA MERAHNYA CM 1 = 1 (ANGKA KODENYA)
2. BILA NYALA MERAHNYA ADA 2 = 2
3. BILA NYALA MERAHNYA ADA 2 = 3
4. BILA NYALA MERAHNYA SMUANYA ATAU ADA 4 = 0
CONTOH : XBOX SAYA ERRORNYA :
- TEKAN TOMBOL EJECT PERTAMA YANG KELUAR NYALA MERAH EMPAT = 0
- TEKAN TOMBOL EJECT KEDUA YANG KELUAR NYALA MERAH JADIATU = 1
- TEKAN EJECT KE TIGA NYALA MERAH EMPAT LAGI = 0
- TEKAN EJECT TERAKHIR ALIAS KE EMPAT MUNCUL MERAH DUA = 2
JADI KESIMPULANNYA BS DI LIHAT KODE ERROR XBOX SAYA : 0102 (UNKNOWN / OVERHEAT )
E45: Unknown (possibly dashboard update related)
E64: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc.
E65: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc. This can also be caused by the tray not being fully closed on boot.
E66: DVD Drive Error: DVD model, or version does not match that of the version expected by the dashboard. OR the firmware version on the drive is older then the firmware version expected by the dashboard. Make sure the DVD drive is of the same version originally included with the console and that it is using either the original firmware included with the console or newer.
E67: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it
E68: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it, This can also be caused by a Hard Drive Eprom Error. Some also believe this might be caused by a problem with the fans.
E69: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it
E71: possibly a dashboard update error, Check below in the "Console Reset Codes" for instructions. If that does not work there is no other solution and the console must be sent back to MS for repair.
E72: (not yet known)
E73: General Hardware Error: Ethernet port... this error is caused by a problem with the Ethernet port.
E74: AV cable error... There is a problem with the AV cable, try using a different AV cable. If the cable is known to be working then there is a 90% chance it's a scaler chip problem (the "ANA" or "HANA" chip connected directly to the AV cable) in rare cases it is the GPU.
E76: (not yet known)
E79: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it
=============================
--==SECONDARY ERROR CODES==-
The specific type of hardware failure can be determined by a "hidden" error code
* Turn the xbox 360 on, and wait till the 3 red lights are flashing.
* Press and hold the sync up button (the small white one), while holding that button press the eject button.
* The LEDs will now blink the first number in the code (as described below).
* Release the eject button and press it again.
* The LEDs will now blink the second number of the code.
* Release the eject button and press it again.
* The LEDs will now blink the third number of the code.
* Release the eject button and press it again.
* The LEDs will now blink the forth number of the code.
* Release the eject button and press it again.
* The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.
Here is how you interpret the LEDs to get the code number:
* All four lights flashing - 0
* One light flashing - 1
* Two Lights flashing - 2
* Three lights flashing - 3
0001 power supply problem
0002 Network Interface problem
0003 Power problem could be the PSU could be the GPU/CPU, somehow the console isn't getting clean power from the power supply.
0010 over heating
0011 over heating - If you are receiving this error after disassembling your console make sure to all 8 of the heatsync screws are tightened securely to the board/heatsink holes.
0012 over heating
0013 over heating
0020 (Not yet known, possibly overheating)
0021 DVD Drive Time out - Can be caused by problems with a firmware flash. This is also speculated to sometime be caused by a problem with the southbridge chipset on the motherboard.
0022 GPU Error / GPU Overheating
0023 (not yet known)
...
0101 (not yet known)
0102 unknown error
* though it's most likely GPU related literally means the console does not know what is wrong. possibly a short or cold solder joint somewhere. So far there is 1 major theory for what causes most of these errors is that the Ram, CPU, or GPU are not soldered properly to the mother board due either to poor manufacturing or excessive heat up and cool down cycles that stress, weaken and eventually break the soldered connection.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced. I have also heard of limited success by simply switching the AV cable from "HDTV" mode to "TV" mode.
0103 CPU Error/ CPU Overheating - see solution for error 0102
0110 Memory Error / Memory Overheating - see solution for error 0102
...
0200 (not yet known)
...
1000 (not yet known)
1001 (not yet known)
1002 (not yet known)
1003 Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it
1010 Hard Drive Error, Can be caused buy a corrupt or missing eProm.
1011 (not yet known)
1012 (not yet known)
1013 (not yet known) possibly a dashboard update error
1020 (not yet known)
1021 (not yet known)
1022 AV cable error... There is a problem with the AV cable, try using a different AV cable. (could also be a problem with the encoder chip)
1023 DVD drive not connected, connect DVD drive to boot
1030 (not yet known)
1031 (not yet known)
1032 (not yet known)
1033 (not yet known)
...
1444 and up There is no "4" in the error codes four lights is a "0" go back and check your code again.
Jika memang Xbox 360 agan ada yang rusak .
Coba di bawa ke tukang servis yang tempat prakteknya ada .
Jangan di bawa ke tempat toko sembarangan yg ga ada tempat workshopnya .
yang ada Penyakit murah di kenain Mahal .
Tambahan gan kalo agan semua ingin xbox 360 type apa ajah khususnya yang fat seperti Falcon , Xenon , Zephyr untuk dimainin 12 jam sehari tanpa obat kuat , disarankan agan ke alamat yang jalan D gang C atas nama Edy untuk di modifikasi ada 2 type modifikasinya menggunakan metode water cooling atau pemasangan kipas external .
Rincian biaya bisa lgsg tanya ke mereka .
Kalo ingin Xboxnya di reball biar tahan sampe 1 tahun cuma durasi playnya ga lebih sampe 4 jam silahkan ke bro Feryn dia bisa tuh dengan budget 750 ribu xbox anda seperti baru lagi .
Toko yang recommended buat fix RROD anda ini dia .
- Doctor games di mangga dua square Lantai UG block B 36 - 37
Kepada Yudi .
- jl. D gang C4 no 23 Rt013 Rw 005,karang anyar ,jakarta pusat 10740. patokan dari pasar baru
Kepada Edy
- Jalan kemanggisan belakang mall taman anggrek .
Kepada Ferin
Dijamin agan agan ini sudah kompeten di bidangnya .
Atau agan mau betulin sendiri nih ane kasih tutorialnya :
Originally Posted by primary question
how to fix it rrod?
Quote:
Originally Posted by answer
ada beberapa cara yang memungkinkan untuk memperbaiki rrod x360 :
1. Bila xboxnya baru skali rrod / baru pertama kali xboxnya, biasanya ini masih mudah di perbaiki yaitu nyalain aja xboxnya dalam kondisi rrod selama 10-20 menit lalu matikan dan diam dalam waktu 1/2 jam trus coba nyalakan kembali.
2. Klo cara di atas msh ga bisa jg, ada cara yang lebih x-trem yaitu nyalakan xbox dengan keadaan kipas belakang xbox 360nya di tutup rapat-rapat dengan kain / bahan yang tebal,jangan sampai ada udara keluar sedikt pun, nyala xboxnya hingga 1/2 jam hingga lampu yang nyala tiga merah menjadi dua merah yang nyala di posisi kiri, bila merah dua nya udah muncul cabut kabel power di blakang jangan di pencet tombol power di depan karena kemungkinan ga mo mati xboxnya, tunggu xboxnya benar2 dingin dalam waktu 1 jam-an lalu nyala kan kembali xboxnya.
3. Bila cara point kedua pun ga ampuh, brarti udah harus di reflow gpu xbox 360 nya.
4. Bila reflow nya msh kurang cukup xboxnya bs di modif (kipas di percepat / di kencengin, x-clamp di ganti skrup dan penggantian thermal paste)
5. Bila masih point 3 dan 4 masih kurang jg perlu di lakukan pemasangan part dalam xbox 360nya yaitu : Penggantian heatsink gpu dengan copper, pasangan heatsink pada 4 memori bagian atas board x360 (ada 8 memori di board di bagian atas dan bagian bawah) dan memasang rubber di 4 memorinya lagi yang ada di bawa/di balik board x360nya, bisa juga dilakukan pemasangan water cooling (next session).
Share This Thread