Broo mau Post casing2 Antec ni....
P160W
Features:
1.2mm anodized aluminum
delivers increased rigidity and a finish that won't lose its luster.
Swiveling front control panel
- Swivels up to 45 degrees
- Connectors: 2 x USB 2.0, 1 x IEEE
1394 (FireWire, i.Link)
and 2 x audio jacks.
- LED temperature display with
two built-in sensors
Windowed side panel
Removable motherboard tray
Accomodates any ATX12V
power supply
10 drive bays
- Color-coordinated CD-ROM & floppy drive covers
a. 4 external 5.25"
b. 2 external 3.5"
c. 4 internal 3.5"
- Rubber mounting grommets in
hard drive trays
Cooling capacity:
a: 1 x 120mm low speed fan
b: 1 x 120mm fan mount
Fan Specs:
-RPM: 1600
-CFM: 56.13
-dB(A): 28
Built-in washable air filter
Removable Side Panel
Fits Micro ATX (9.6" x 9.6") and
Standard ATX (12"x 9.6")
motherboards
Unit Dimensions:
- 20.3"(H) x 8.1"(W) x 19.7"(D)
- 51.56cm(H) x 20.57cm(W) x 50.04cm(D)
Package dimensions:
- 22.7" (H) x 11" (W) x 22.6" (D)
- 57.66cm (H) x 27.94cm (W) x 57.40cm (D)
Weight:
- Net:14.30lb / 6.49kg
- Gross: 18.00lb / 8.16kg
P180
![]()
Features:
Unique upper and lower chamber structure: The power supply resides in a separate chamber to isolate heat from the system and lower system noise
Innovative three-layer side panels and front door (aluminum, plastic, aluminum) dampen system noise, making this one of the quietest cases available
Cooling System:
- 1 rear (standard) 120mm TriCool Fan with 3-speed switch control
- 1 top (standard) 120mm TriCool Fan
- 1 lower chamber (standard) 120mm TriCool Fan
- 1 front (optional) 120mm fan
- 1 middle (optional) 120mm fan to cool graphics cards
- Upper drive cage can be used as a duct to provide fresh air to graphics cards
External fan control on the rear panel for the top and rear fans in the upper chamber
Maximum expandability with 11 Drive Bays
- External 4 x 5.25"; 1 x 3.5"
- Internal 6 x 3.5" for HDD
Motherboard: Fits micro and standard ATX
Double hinge front door designed to open up to 270º
Rubber grommeted ports on the rear for liquid-cooling tubes allow you to mount external liquid-cooling hardware
7 Expansion Slots
Front Ports
- 2 x USB 2.0
- 1 x IEEE 1394 (FireWire®, i.Link®
- Audio In and Out
Cable organizers behind motherboard tray minimize cable clutter
Material: 0.8mm cold rolled steel for durability through the majority of chassis, 1.0mm cold rolled steel around the 4x HDD area
To optimize performance of your P180 the choice of your power supply is crucial. Antec strongly recommends choosing from our Phantom, NeoPower or TruePower series
Silicone grommets in the hard drive cages absorb vibrations and reduce noise
Built in washable air-filter
Unit Dimensions:
- 21.3" (H) x 8.1" (W) x 19.9" (D)
- 54cm (H) x 20.5cm (W) x 50.7cm (D)
Package dimensions:
- 25" (H) x 12" (W) x 24" (D)
- 63.5cm (H) x 30.48cm (W) x 60.96cm (D)
Weight:
- Net:31.00lb / 14.00kg
- Gross: 36.00lb / 16.33kg
Share This Thread